A deep geoelectric survey of the Carnmenellis granite     

D. Beamish 《Geophysical Journal International》1990,102(3):679-693

  相似文献   

阿吾拉勒山西段二叠纪火山岩组合与构造环境分析     

姜常义  吴文奎  谢广成  李伍平 《地球科学与环境学报》1992,(4)

阿吾拉勒山体西段发育了厚度巨大的下二叠统火山岩,这些火山岩均属碱性玄武岩系列,以钾质类型为主,钠质类型次之,岩浆演化呈现出跨越B型趋势。这种火山活动是在大陆地壳内部产生的,代表了陆内裂谷演化的早期阶段。在早二叠世末期,由于受到新源运动的影响,这种火山活动被终止了。  相似文献   

三峡重庆库区深部地球物理特征与断裂构造   总被引：1，自引：0，他引：1  

胡建平  赵军龙  汪文秉  李娜 《地球科学与环境学报》2005,27(3):49-54

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。  相似文献   

金州地区震旦系基本层序与沉积环境     

张国仁 《国土资源》1993,(3)

金州地区广泛发育震旦纪地层,具分布连续、出露完整、沉积相标志明显的特点。本文运用现代沉积学和地层学理论,对区内震旦系岩石地层进行了基本层序研究与沉积环境分析。  相似文献   

山东省侵入岩岩石单位及其代号的厘定   总被引：1，自引：0，他引：1       下载免费PDF全文

王世进  张成基  宋明春  王沛成 《山东国土资源》2002,18(1):9-20

根据《1∶2 5万区域地质调查技术要求 (暂行 )》和我省正在进行的 1∶2 5万区调修测取得的阶段性成果 ,对山东省侵入岩岩石单位及其代号进行了厘定 :不同类型的花岗岩类均作为正式填图单位按“年代 岩性和典型产地方法”确定填图单位代号 ,而独立侵入体、脉岩和包体 ,以及基性—超基性岩则作为非正式填图单位按“年代 岩性方法”确定填图单位代号。  相似文献   

Electromagnetic signals associated with stick–slip of quartz-free rocks     

Akito Tsutsumi  Nobumasa Shirai 《Tectonophysics》2008,450(1-4):79-84

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.  相似文献   

Gouging abrasion test for rock abrasiveness testing     

V.A. Golovanevskiy  R.A. Bearman 《International Journal of Mineral Processing》2008

Wear parts of many mineral processing and mining equipment are often subjected to high stress loads applied at high speeds and at varying angles of incidence, where the prevalent mode of wear is high-stress gouging/sliding impact abrasion. Examples include crusher liners, wear liners in hoppers and chutes, picks on roadheaders, discs on tunnel boring machines and ground engaging tools. Abrasion under these conditions is characterised by a high material removal rate and thus has a direct bearing on wear rates and service life of the equipment concerned. However, at present there appears to be no method for rock abrasiveness assessment under these conditions. This paper describes a new Gouging Abrasion method and apparatus for testing abrasivity of rocks under high-stress gouging/sliding impact wear. A Gouging Abrasion Index (Gi) is introduced, which can be used for prediction and assessment of component life expectancy and efficiency of mineral processing and materials handling equipment. Experimental data from Gouging Abrasion testing of numerous Australian rock types are presented. It is suggested that the results of Gi testing can be used for wear rate predictions for a variety of mineral processing and materials handling equipment working under high-stress gouging/sliding impact abrasion conditions.  相似文献   

汶川大地震（MS 8.0）同震变形作用及其与地质灾害的关系   总被引：12，自引：2，他引：10  

付小方  侯立玮  李海兵  王宗秀  邹付戈 《地质学报》2008,82(12):1733-1746

2008年5月12日发生于四川盆地西部龙门山断裂带的汶川大地震（MS 8.0）波及半个亚洲,震撼整个中国。本文通过地震后的实地调查,对发育在龙门山断裂带上的同震地表破裂带的分布、产状、继承性复活与变形特征,以及同震变形与地震地质灾害的关系等进行了初步总结,分析表明这次汶川大地震(MS 8.0)沿北川-映秀逆冲断裂和安县-灌县逆冲断裂同时发生地表破裂,前者产生以高角度逆冲兼右旋走滑为特征的地表破裂带长约275 km,后者产生以缓倾角逆冲作用为特征的地表破裂带长约80 km。汶川大地震的同震地表破裂带分布具有分段性特征,并与地表破坏程度的分带性有着一定的内在联系,详细研究表明,同震地表破裂带的产状直接影响地表破坏程度和地震地质灾害的强度,汶川大地震（MS 8.0）沿呈高角度陡倾的北川-映秀逆冲断裂发育的同震地表变形所产生的地表破坏程度和地震地质灾害的强度比沿缓倾角的安县-灌县逆冲断裂要强。从各种类型的地震断裂来看,具有垂直运动的逆冲型地震断裂所造成的地表破坏程度和地质灾害强度比具水平运动的走滑型地震断裂要强。因此,汶川大地震发生的破裂过程和同震地表变形与地震地质灾害的关系值得深入研究。  相似文献   

Geotechnical properties of evaporite soils of the Dead Sea area     

Sam Frydman  Josef Charrach  Ian Goretsky 《Engineering Geology》2008,101(3-4):236-244

The Dead Sea Basin is the lowest point on earth and is tectonically subsiding. During the Holocene Period the climate became much drier with increasing evaporation whereby initially lacustrine sediments were deposited from the non-marine brines, giving a multi-layered stratigraphy of lime carbonate and halite sediments. The lime carbonate sediments are comprised of laminated, clay to silt sized, clastic sediments (calcite) and authigenic aragonite and gypsum. The halite commonly appears as rock salt. Chemical industries, based on harvesting the salts from the Dead Sea, have developed on both the Israeli and the Jordanian sides of the basin. The lime carbonate soils are used for dike construction, and these soils, together with significant salt layers, are encountered in the foundations of structures, dikes, and tailings dams, requiring definition of their geotechnical properties. Use of standard soil mechanics definitions and testing approaches for the lime carbonates have been found inapplicable, particularly in view of their exceptionally high saline content, and it has been necessary to develop new concepts. The rock salt is encountered at shallow depths, with unit weights considerably lower than those usually discussed in the literature, and with correspondingly different mechanical properties. The geotechnical properties of these soils, and approaches used to define them, are discussed in the paper.  相似文献   

Assessing soil erosion in Mediterranean karst landscapes of Lebanon using remote sensing and GIS   总被引：10，自引：0，他引：10  

R. Bou Kheir  C. Abdallah  M. Khawlie 《Engineering Geology》2008,99(3-4):239

Maps showing the potential for soil erosion at 1:100,000 scale are produced in a study area within Lebanon that can be used for evaluating erosion of Mediterranean karstic terrain with two different sets of impact factors built into an erosion model. The first set of factors is: soil erodibility, morphology, land cover/use and rainfall erosivity. The second is obtained by the first adding a fifth factor, rock infiltration. High infiltration can reflect high recharge, therefore decreasing the potential of surface runoff and hence the quantity of transported materials. Infiltration is derived as a function of lithology, lineament density, karstification and drainage density, all of which can be easily extracted from satellite imagery. The influence of these factors is assessed by a weight/rate approach sharing similarities between quantitative and qualitative methods and depending on pair-wise comparison matrix.The main outcome was the production of factorial maps and erosion susceptibility maps (scale 1:100,000). Spatial and attribute comparison of erosion maps indicates that the model that includes a measure of rock infiltration better represents erosion potential. Field investigation of rills and gullies shows 87.5% precision of the model with rock infiltration. This is 17.5% greater than the precision of the model without rock infiltration. These results indicate the necessity and importance of integrating information on infiltration of rock outcrops to assess soil erosion in Mediterranean karst landscapes.  相似文献